Loading...
Serving Santa Clarita, CA and surrounding areas. (661) 404-1293
Vehicles moving too fast through your driveway or private road are a safety problem that signs alone can't fix. We install permanent asphalt speed bumps that give every driver a physical reason to slow down.
Speed bump installation in Santa Clarita means building a raised section of compacted asphalt directly into your paved surface, finished with bright striping so drivers see it clearly, and most single-location jobs are complete within a few hours.
A paving contractor marks the location, prepares the existing surface so the new asphalt bonds correctly, shapes and compacts the bump to the right height and width, and then stripes it once the surface has cooled. The result is a permanent, solid feature that is part of the pavement - not a mat that loosens or a bolt-in rubber unit that shifts over time. In Santa Clarita's many planned communities, a neatly installed bump with clean striping also meets the appearance standards HOAs expect.
If your surrounding pavement is in poor shape, it's worth pairing the bump installation with asphalt sealcoating or targeted repairs so the bump has a solid foundation and the edges don't crack prematurely. A good contractor will tell you about any base issues before work starts, not after.
If cars roll through your driveway, parking lot, or private road faster than feels safe, a speed bump is the most direct fix. This is especially common in Santa Clarita communities where long, straight private roads or through-traffic patterns invite higher speeds.
When children play, residents walk, or guests park near a lane where vehicles travel, the margin for error is small. A speed bump creates a physical cue that drivers must slow before reaching that zone - something a sign alone can't guarantee.
In many Santa Clarita planned communities, the HOA identifies speed as a recurring complaint from residents. If your community has received formal complaints or a safety review has recommended traffic calming, speed bump installation is often the approved next step.
If you're scheduling a driveway repave or parking lot resurfacing, adding a speed bump during that project is the most cost-efficient time to do it. The surface is already being worked, so the additional cost and disruption are minimal compared to a separate visit later.
We install permanent asphalt speed bumps on residential driveways, HOA private roads, and commercial parking lots across Santa Clarita. Every installation begins with a site walk to confirm placement - where a bump goes is as important as having one at all. A single bump works well for a short driveway or a specific choke point, while a longer private road often needs two or more spaced so drivers can't accelerate back to an unsafe speed between them. If you're already planning a repave or resurfacing, we coordinate bump installation as part of that project to minimize cost and disruption. After the bump is shaped and compacted, we apply durable striping - ask us about thermoplastic markings, which hold up longer than standard paint under the intense Southern California sun. If the surrounding pavement needs attention before we install, asphalt sealcoating or targeted crack repair can be handled in the same visit. The California Contractors State License Board sets the licensing standard for this work, and you can verify any contractor's active license at cslb.ca.gov.
For HOA communities and commercial properties that want a complete curb appeal and safety upgrade, we also offer concrete curbing and sidewalks that complement speed bumps as a complete traffic calming and pedestrian safety package. Both services can be coordinated to reduce the number of separate visits and keep disruption to your property to a minimum.
Best for homeowners who want a permanent, low-maintenance solution to control vehicle speed near a play area, garage, or pedestrian path.
Suited to planned communities in Santa Clarita that need professionally installed bumps meeting HOA appearance standards, with full documentation support.
Ideal for businesses or property managers who need traffic calming at parking lot entry points or pedestrian crossing zones.
The most cost-efficient option for property owners already planning a resurfacing project - add bumps at the same time and avoid scheduling a separate crew visit.
Santa Clarita is one of the larger cities in Los Angeles County, and it's primarily made up of suburban neighborhoods with private roads and driveways managed by HOAs or property owners rather than the city. Long, straight private roads in communities throughout Valencia tend to invite higher speeds from residents and delivery drivers who treat them as shortcuts. Santa Clarita's rapid residential growth has also brought significantly more delivery and service vehicle traffic into neighborhoods that weren't built to handle it - package deliveries, food delivery services, and service trucks now pass through private drives far more often than they did a decade ago. A well-placed speed bump signals to every driver, regardless of familiarity with the property, that they need to slow down.
The intense Southern California sun is also a factor in how well your installation holds up over time. Standard paint markings fade faster here than in cooler, cloudier climates, which is why we recommend discussing marking durability at the time of installation. Thermoplastic striping is worth the conversation for any property in Saugus or elsewhere in the valley that gets full sun exposure. Faded striping defeats the safety purpose of the bump - drivers who can't see it clearly don't slow down in time. The National Asphalt Pavement Association provides standards for asphalt installation practices, including traffic calming features like speed bumps, that inform how our crews approach every job.
Describe your property - where the bump needs to go, what type of property it is, and roughly how many bumps you need. We respond within one business day and schedule a site visit to assess the existing pavement condition.
We visit your property, measure the area, check the condition of the surrounding pavement, and recommend placement for maximum effect. If any base or surface issues need to be addressed first, we flag them before quoting.
If your property is governed by an HOA, you'll need written approval before work is scheduled - we can provide a diagram or spec sheet to support your application. We'll also advise on any permit requirements near a public road or right-of-way.
The crew arrives, preps the surface, shapes and compacts the asphalt bump, then applies bright striping once the surface has cooled. Most single-bump jobs are done in a few hours. We walk the finished bump with you before leaving.
Free on-site quote. Written estimate before any work begins. HOA documentation provided at no extra charge.
(661) 404-1293Santa Clarita's summer temperatures regularly push past 90 degrees Fahrenheit, and poorly mixed or under-compacted asphalt will soften and deform in that heat. We use a mix suited to this region and schedule installations for cooler parts of the day when conditions call for it.
A well-installed bump has smooth, even edges that blend into the surrounding pavement on both sides, plus bright markings that warn drivers in time to slow safely. We don't consider the job done until both are right. We can apply thermoplastic striping that holds up longer than standard paint under Southern California sun.
Many of Santa Clarita's planned communities in Valencia and Saugus require written approval before any speed bump is added to a visible or shared surface. We provide spec sheets and simple diagrams to support your HOA application so the approval process doesn't stall your project.
Our California contractor's license is active and can be confirmed at the state licensing board before you sign anything. Licensing protects you legally and confirms the contractor meets the state's standards for this type of work.
A permanent asphalt speed bump done right doesn't require repositioning, re-bolting, or revisiting every few years. We focus on getting the profile, compaction, and striping right the first time so the installation holds up through Santa Clarita's heat cycles and stays doing its job without follow-up visits.
Protect and extend the life of the pavement surrounding your new speed bump with a UV-resistant sealcoat applied before or after installation.
Learn MorePair speed bumps with concrete curbing and pedestrian paths to create a complete traffic calming and safety layout for your property.
Learn MoreOur crew works around Santa Clarita's summer heat with early-morning starts - your bump can be in and ready the same day, so your property is safer before the week is out.